XIAO-COMPATIBLE · 36V / 3A

TekView Micro Driver MD1

Smart motor driver module: an ultra-compact power-and-control board for DC motors and linear actuators, in the Seeed XIAO form factor. Wireless control and manual emergency backup on one board.

36V / 3A Matter-ready Automotive-grade
▶ Try the interactive demo
TekView Micro Driver MD1 smart motor driver in XIAO form factor — 3D render
3D render — production-ready layout

Key Specifications

Driver IC
Automotive-grade driver IC
Power
Up to 36 V supply · 3 A continuous (4 A short-term, up to 20 s)
Logic Supply
On-board DC-DC from the motor supply to 5 V – no separate supply needed for the microcontroller
Protection
Fuse and TVS diode on the input · built-in overcurrent and thermal protection
Diagnostics
SPI interface for digital current sensing and fault diagnostics
Form Factor
Same footprint as a Seeed XIAO – the XIAO stacks right on top
Wireless
Socket for XIAO ESP32-C6 (Matter-ready, Thread) — also compatible with ESP32-C3 and ESP32-S3
Manual Backup
Manual bypass port for up/down buttons, isolated with a Schottky diode
Connectors
2.8 mm (0.110 in) PCB tab terminals for power and motor
Firmware
Open – you write your own application
INTERACTIVE DEMO

See the board in action

Control a linear actuator wirelessly – or from the smart-home apps you already use, via Matter. Watch the current sensing live, and see how the board detects a stall at the end stop and stops the motor automatically.

Concept demo in the browser · simulated values

▶ Open the demo
PHYSICAL AI

Let AI move things in the real world

AI agents can read, write and plan. With MD1 they can also control physical devices – a desk, a bed, a robot arm.

Connected

Wi-Fi, Thread and Matter via XIAO ESP32-C6. Turn the motor into a tool an AI agent can call, for example over MCP or a REST API in your firmware.

Aware

Real-time current sensing and fault status give the AI feedback from the physical world: end stops, stalls or overloads.

Safe by design

Hardware protection and a manual button backup keep a human in control – whatever the AI decides.

“Raise the desk to standing height” → AI agent → MD1 → actuator

Comparison with common motor driver boards

MD1 does not compete on raw current. It competes on being a complete smart controller in the smallest footprint.

Feature TekView MD1 Adafruit DRV8871 Pololu G2 18v17 Cytron MD10C
Supply voltage≤ 36 V6.5–45 V6.5–30 V5–30 V
Current3 A continuous3.6 A peak17 A cont.13 A cont. / 30 A peak (10 s)
SizeXIAO footprint24.4 × 20.4 mm1.3″ × 0.8″Large board
MicrocontrollerSocket for any XIAO, stacks on top–––
Wireless / MatterYes, with XIAO ESP32-C6–––
On-board logic supplyYes––Yes
Current sensing to MCUDigital, over SPI–Analog–
Manual button backupYes––Test buttons only

Competitor figures from the manufacturers' product pages, as of November 2026.

Frequently Asked Questions

What is TekView Micro Driver MD1?

MD1 is a compact smart motor driver for one brushed DC motor or linear actuator. It has the same footprint as a Seeed Studio XIAO board, so a XIAO microcontroller stacks directly on top.

How do I control a linear actuator with an ESP32?

Stack a XIAO ESP32-C6, C3 or S3 on MD1, connect the actuator and a supply up to 36 V, and drive it with PWM and a direction signal. MD1 powers the ESP32 from the motor supply, so no extra power supply is needed.

Can I control my desk or bed from a smart-home app?

MD1 is Matter-ready. With a XIAO ESP32-C6 and Matter firmware, the actuator can be controlled from Matter-compatible smart-home apps without a custom mobile app. Official ecosystem certification is not yet completed.

What voltage and current does MD1 support?

Up to 36 V supply and 3 A continuous, which covers most 12 V and 24 V linear actuators used in furniture and light robotics.

What happens if the Wi-Fi or the microcontroller fails?

MD1 has a manual bypass port for standard up/down buttons, isolated with a Schottky diode. The motor can still be moved by hand control – important for care and medical furniture.

Can MD1 detect a stalled or overloaded motor?

Yes. MD1 reports motor current and fault status over SPI, so firmware can detect end stops, stalls and overloads. The driver also has built-in overcurrent and thermal protection.

Can an AI agent control MD1?

Yes. MD1 is network-connected and reports its own status, so you can expose the motor as a tool for AI agents, for example over MCP or a REST API in the firmware. Hardware protection and a manual button backup make sure a person can always override.

Can I order MD1 in volume or get a customized version?

Yes. We offer evaluation kits, pilots, volume pricing and customization (logo, firmware, or schematic/PCB changes under NDA). Send a request below or email anas@tekview.no.

PILOT PROGRAM · 5 PARTNERS

Become an MD1 pilot partner

MD1 is designed and in testing. We are looking for five companies that build products with DC motors or linear actuators – furniture, medical and care beds, light robotics, automation – to test MD1 in their own application.

  • Evaluation boards for your team
  • A production discount that stays locked in
  • Free standard customization: logo, firmware branding, connector choice
  • Direct contact with the engineer who designed the board
Apply as a pilot partner
PDF

Public Datasheet

Full external specification, dimensions, and pinout. Internal schematic details are shared only under a signed NDA.

⬇ Download PDF

Customization & White-Label

✅ Standard Customization

  • Logo on the silkscreen and choice of solder mask color
  • Firmware branding (device name, default ports, current limits)
  • Choice of connector type and enclosure

Available through the order form below.

🔒 Custom Design (NDA)

  • Changes to the schematic or PCB layout
  • Custom interfaces or mechanical requirements
  • Requires a signed NDA and a minimum order quantity (MOQ)

Flag it in the form — we'll follow up on the NDA process.

Order / Request a Quote

Fill out the form and we'll follow up with pricing and lead time.

Or contact us directly: anas@tekview.no · +47 483 94 196